MkaPEB Tekla Structures Export

MkaPEB is the most efficient and comprehensive software ever developed for the analysis and design of single-storey steel structures worldwide.

It empowers engineers to achieve the most cost-effective solutions in the shortest time, all while maintaining the highest standards of quality.

Pre-Engineered Building (PEB)
Tekla Structures Export
Sap2000 Export
Sketchup Export
What is MkaPEB Tekla Structures Export?
Videos

MkaPEB helps you design industrial structures faster, letting you reach the most economical solution and compete effectively with prefabricated alternatives.

With wizard-based modeling, you can easily design structures, connections, and foundations, and produce GA, part, and assembly drawings. Plus, you can export your model to Tekla along with macros.

Shattering the Monopoly: How AI-Driven Cost Optimization is Positioning Steel as the Low-Cost Leader and Unlocking a 20X Larger Market

The Strategic Amplification of Engineering Talent: Leveraging AI as a Force Multiplier in Structural Design to Drive Innovation and Growth

The First-Mover Advantage in PEB Bidding: Leveraging AI to Win More Projects with Unbeatable Speed and Precision

The First-Mover Advantage in PEB Bidding: Leveraging AI to Win More Projects with Unbeatable Speed and Precision

The First-Mover Advantage in PEB Bidding: Leveraging AI to Win More Projects with Unbeatable Speed and Precision

The Strategic Amplification of Engineering Talent: Leveraging AI as a Force Multiplier in Structural Design to Drive Innovation and Growth

Shattering the Monopoly: How AI-Driven Cost Optimization is Positioning Steel as the Low-Cost Leader and Unlocking a 20X Larger Market

The First-Mover Advantage in PEB Bidding: Leveraging AI to Win More Projects with Unbeatable Speed and Precision

Snow Load
Wind Load
Seismic Information
Snow Load Code USA: ASCE-07-22
Risk Category II
Snow Surface Type B (see Section 26.7)
Exposure Type Fully Exposed
Thermal Condition Unheated structures, open-air structures, structures kept just above freezing [40 to 50 °F (4 to 10 °C)], and other structures with cold, ventilated roofs meeting the minimum requirements of the applicable energy code
Winter Wind Parameter, W2 0.0
Ground Snow Load 30 lb/ft² | 1.437 kN/m²
Flat Roof Snow Load 22.68 psf | 1.086 kN/m²

Wind Load Code USA: ASCE-07-22
Main Wind Force Resisting System Chapter 27
Components And Claddings Chapter 30
Building Class I
Wind Exposure For buildings or other structures with a mean roof height ≤ 30 ft (9.1 m): Exposure Category B applies where Surface Roughness B prevails for a distance > 1,500 ft (457 m).
For buildings > 30 ft (9.1 m): Exposure B applies where Surface Roughness B prevails for a distance > 2,600 ft (792 m) or 20 times the building height, whichever is greater. [ASCE 7-22]
Topographic Type 2D Ridge
Kzt 1.00
In Hurricane Prone FALSE
Wind Speed 85 mph
Enclosure Class Enclosed buildings
Internal Pressure Coefficient Cpi+ 0.18
Internal Pressure Coefficient Cpi- 0.18

Seismic Design Code USA: ASCE-07-22
Longitude 34.05354
Latitude -118.24529
Ss 2.442
S1 0.857
Pga 0.924
Pgv 0.924
Ground Type C
Ground Type Description Very dense sand or hard clay
Structural System C04: Steel ordinary moment frames
Reduction Factor (R) 3.5
Importance Factor (I) 1
Live Load Factor (n) 0.3

Snow Load Table

Snow Load

Snow Load Code USA: ASCE-07-22
Risk Category II
Snow Surface Type B (see Section 26.7)
Exposure Type Fully Exposed
Thermal Condition Unheated structures, open-air structures, structures kept just above freezing [40 to 50 °F (4 to 10 °C)], and other structures with cold, ventilated roofs meeting the minimum requirements of the applicable energy code
Winter Wind Parameter, W2 0.0
Ground Snow Load 30 lb/ft² | 1.437 kN/m²
Flat Roof Snow Load 22.68 psf | 1.086 kN/m²
Wind Load Table

Wind Load

Wind Load Code USA: ASCE-07-22
Main Wind Force Resisting System Chapter 27
Components And Claddings Chapter 30
Building Class I
Wind Exposure For buildings or other structures with a mean roof height ≤ 30 ft (9.1 m): Exposure Category B applies where Surface Roughness B prevails for a distance > 1,500 ft (457 m).
For buildings > 30 ft (9.1 m): Exposure B applies where Surface Roughness B prevails for a distance > 2,600 ft (792 m) or 20 times the building height, whichever is greater. [ASCE 7-22]
Topographic Type 2D Ridge
Kzt 1.00
In Hurricane Prone FALSE
Wind Speed 85 mph
Enclosure Class Enclosed buildings
Internal Pressure Coefficient Cpi+ 0.18
Internal Pressure Coefficient Cpi- 0.18
Seismic Information Table

Seismic Information

Seismic Design Code USA: ASCE-07-22
Longitude 34.05354
Latitude -118.24529
Ss 2.442
S1 0.857
Pga 0.924
Pgv 0.924
Ground Type C
Ground Type Description Very dense sand or hard clay
Structural System C04: Steel ordinary moment frames
Reduction Factor (R) 3.5
Importance Factor (I) 1
Live Load Factor (n) 0.3

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/07/CelikYapiModeliOnDegerlendirmesi.pdf"]

[/dflip]

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/07/CelikYapiyaEtkiyenYukleri.pdf"]

[/dflip]

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/07/CelikYapilardaYukBirlesimleri.pdf"]

[/dflip]

 

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/07/GeoteknikRaporVeTemelTasarimi.pdf"]

[/dflip]

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/07/ServiceContractDE.pdf"]

[/dflip]

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/07/ServiceContractTR.pdf" ]

[/dflip]

 

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/07/ServiceContractEN.pdf"]

[/dflip]

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/06/General-Terms-And-ConditionsDE.pdf"] [/dflip]

[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/06/General-Terms-And-ConditionsEN.pdf"]

[/dflip]

 
[dflip source="https://www.mkapeb.com/wp-content/uploads/2024/06/General-Terms-And-ConditionsTR.pdf"] [/dflip]

Please choose

Product(s)

Please review the Terms,Conditions and Privacy Policy

11 + 13 =